Specifications
Form factor
2.5-inch industrial SATA SSD
Interface
SATA III (6 Gb/s)
Capacities
128 GB to 2 TB
Sequential read
Up to 560 MB/s
Sequential write
Up to 510 MB/s
NAND type
TLC NAND flash with an industrial-grade controller
Operating temperature
-40 C to +85 C
Power-loss protection
Hardware and firmware-based PLP
Environmental testing
Double 85 test — 85 C at 85% relative humidity
Thermal cycling
Rapid temperature cycling tested at 10 C/min
Additional stress testing
High and low temperature stress testing
Anti-sulfuration
G3 standard anti-sulfuration protection
MTBF
Over 3 million hours
Wear management
Dynamic and static wear leveling with bad block management
Flash upkeep
TRIM and garbage collection support
Coating options
Conformal coating available
Mechanical options
Sidefill / underfill and metal or graphene heatsink options
Target segments
Industrial control, rail transportation and data communication
Compatible equipment
Automation devices, metro gate systems and communication base stations
Design priority
Data integrity under unexpected power loss and sustained write load
Overview
The BIWIN TGS201 is an industrial 2.5-inch SATA III SSD built around one requirement: keep working where temperature swings, humidity and power quality are hostile. It is specified for -40 C to +85 C operation with 128 GB to 2 TB of capacity and sequential read and write performance up to 560 MB/s and 510 MB/s respectively, using TLC NAND flash with an industrial-grade controller.
Endurance and data integrity are engineered rather than assumed. The drive provides both firmware and hardware-based power-loss protection, so volatile data has time to reach flash when power fails — the failure mode that most often corrupts consumer drives in industrial installations. Supporting that are dynamic and static wear leveling, bad block management, TRIM and garbage collection, delivering an MTBF above 3 million hours.
Qualification covers the specific stresses of the target market: a Double 85 test at 85 C and 85% relative humidity, rapid temperature cycling at 10 C/min, high and low temperature stress testing, and G3-standard anti-sulfuration protection for environments with sulfur-bearing contaminants — common in industrial control, rail and telecom installations. BIWIN also offers conformal coating, sidefill/underfill and metal or graphene heatsink options for further hardening, making the TGS201 suitable for automation devices, metro gate systems and communication base stations.
Key Benefits
Wide-temperature reliability from -40 C to +85 C with Double 85 humidity qualification, 10 C/min thermal cycling and G3 anti-sulfuration protection. Data safety under power failure via combined hardware and firmware power-loss protection with over 3 million hours MTBF, plus customisable hardening through conformal coating, underfill and metal or graphene heatsinks.
Applications
Industrial control and automation equipment, rail transportation and metro gate systems, communications base stations and telecom cabinets, outdoor and remote installations with wide temperature swings, and any embedded system where sudden power loss must not corrupt stored data.
Request a Quote — BIWIN TGS201 — INDUSTRIAL 2.5-INCH WIDE-TEMPERATURE SATA SSD, -40 C TO +85 C
QS Compute — global B2B supply of AI computing hardware, edge AI systems and accelerators. Volume pricing, 15-day sample lead time.
Get Your Quote →