Specifications
CAN interface
CAN interface for the PCI Express Mini slot (uses PCIe lane)
1, 2, or 4
1, 2, or 4 High-speed CAN channels (ISO 11898-2)
Form factor PCI Express
Form factor PCI Express Mini (only for single and dual channel versions due to the height of the four-channel version)
Complies
Complies with CAN specifications 2.0 A/B and FD
CAN FD support
CAN FD support for ISO and Non-ISO standards switchable
CAN FD bit rates
CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
CAN bit rates
CAN bit rates from 25 kbit/s up to 1 Mbit/s
CAN bus connection
CAN bus connection via connection cable and D-Sub, 9-pin (in accordance with CiA® 106)
FPGA implementation
FPGA implementation of the CAN FD controller
NXP TJA1044GT CAN transceiver
NXP TJA1044GT CAN transceiver
Galvanic isolation on the
Galvanic isolation on the CAN connection up to 300 V, separate for each CAN channel
CAN termination can be
CAN termination can be activated through solder jumpers, separately for each CAN channel
PCIe data transfer
PCIe data transfer via bus master DMA
DMA memory access operations
DMA memory access operations with 32- and 64-bit addresses
Measurement
Measurement of bus load including error frames and overload frames on the physical bus
Induced error generation
Induced error generation for incoming and outgoing CAN messages
Extended operating temperature range
Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
Overview
The PCAN-miniPCIe FD is a PEAK-System CAN interface. PEAK-System builds the PCAN-miniPCIe FD around its own CAN controller implementation, so the interface presents a uniform API across the PCAN range (PCAN-Basic, PCAN-View and the Linux/SocketCAN drivers) while the physical layer is matched to the host form factor.
It is supplied from stock with the current firmware. The specification list below is taken directly from the manufacturer's product documentation.
Key Benefits
Genuine PEAK-System hardware with the full PCAN software stack. CAN FD capable where the model supports it. Isolated physical layer for industrial environments. Wide temperature range on the industrial variants. Long-term availability from the manufacturer.
Applications
CAN and CAN FD development, ECU flashing and diagnostics, vehicle and machinery test benches, industrial automation networks, and data logging where a host-side CAN interface or gateway is required.
Request a Quote — PCAN-MINIPCIE FD — CAN FD INTERFACE FOR PCI EXPRESS MINI
QS Compute — global B2B supply of AI computing hardware, edge AI systems and accelerators. Volume pricing, 15-day sample lead time.
Get Your Quote →