Specifications
Ordering Code
LFCPNX-EVN
Board
CertusPro-NX Evaluation Board
FPGA Device
LFCPNX-100 (CertusPro-NX)
Logic Elements
98K LUT4
Platform
Lattice Nexus (FD-SOI 28 nm)
Embedded Block RAM
4.1 Mb EBR + 0.5 Mb LRAM
DSP
180 DSP multipliers
SerDes
8x 10.3 Gbps
PCIe
PCIe Gen3 x4 hard IP
Memory Interface
Hardened DDR4 / LPDDR4 controllers
Networking
10GbE-capable SerDes lanes, GbE PHY
Camera
MIPI CSI-2 / D-PHY
Configuration
Instant-on SPI flash boot
Security
Bitstream encryption and authentication (AES / ECDSA)
Toolchain
Lattice Radiant software, Propel RISC-V build flow
Vendor
Lattice Semiconductor
Lattice CertusPro-NX board comparison
| Ordering Code | Board | Device | Logic Elements | SerDes |
|---|---|---|---|---|
| LFCPNX-EVN | CertusPro-NX Evaluation Board | LFCPNX-100 | 98K | 8x 10.3 Gbps |
| LIFCL-40-EVN | CrossLink-NX Evaluation Board | LIFCL-40 | 39K | 2x 2.5 Gbps |
| LFD2NX-VERSA-B-EVN | Certus-NX Versa Board | LFD2NX-40 | 39K | 2x 5 Gbps |
| iCE40UP5K-B-EVN | iCE40 UltraPlus Breakout Board | iCE40UP5K | 5.3K | none |
Overview
CertusPro-NX is the general-purpose member of Lattice's Nexus family and the LFCPNX-100 device on this board is the largest of the line at 98K logic elements. What separates it from fabric-only FPGAs is the hardened I/O: eight 10.3 Gbps SerDes, a PCIe Gen3 x4 hard block and DDR4/LPDDR4 memory controllers that do not consume logic when instantiated. That combination targets edge systems that must bridge 10GbE, PCIe and camera links while staying inside a passively cooled power budget. Bitstream encryption and ECDSA authentication are on-die, so IP protection does not need an external secure element. Ordered as LFCPNX-EVN.
Need Lattice CertusPro-NX Evaluation Board (LFCPNX-EVN)?
Enterprise hardware — configured, tested, deployed. Contact us for pricing and availability.
Request Quote